fr en

Réactifs et instruments pour l'immunologie, la biologie cellulaire et la biologie moléculaire.

DAPI (dihydrochloride) [28718-90-3]

Imprimer

Référence HY-D0814-25mg

Conditionnement : 25mg

Contactez votre distributeur local :

Téléphone : +1 850 650 7790

Marque : MedChemExpress

Demander plus d'informations

Contactez votre distributeur local :

Téléphone : +1 850 650 7790

Description

DAPI dihydrochloride is a DAPI dye. DAPI is a fluorescent dye that binds strongly to DNA. It binds to the AT base pair of the double-stranded DNA minor groove, and one DAPI molecule can occupy three base pair positions. The fluorescence intensity of DAPI molecules bound to double-stranded DNA is increased by about 20 times, and it is commonly observed with fluorescence microscopy, and the amount of DNA can be determined based on the intensity of fluorescence. In addition, because DAPI can pass through intact cell membranes, it can be used to stain both live and fixed cells^[1].

In Vitro

General Protocol
1. Preparation of DAPI working solution
1.1 Preparation of the stock solution
Dissolve 1 mg DAPI in 1 mL ddH₂O to obtain 1 mg/mL of stock solution.
Note: It is recommended to store the stock solution at -20 °C or -80 °C away from light and avoid repetitive freeze-thaw cycles.
1.2 Preparation of DAPI working solution
Dilute the stock solution in serum-free cell culture medium or PBS to obtain 1-10 ug/mL of working solution.
Note: Please adjust the concentration of DAPI working solution according to the actual situation.
2. Cell staining
2.1 Suspension cells（6-well plate）
a. Centrifuge at 1000 g at 4°C for 3-5 minutes and then discard the supernatant. Wash twice with PBS, 5 minutes each time.The cell density is 1×10⁶/mL.
b. Add 1 mL of working solution, and then incubate at room temperature for 3-10 minutes.
c. Centrifuge at 400 g at 4°C for 3-4 minutes and then discard the supernatant.
d. Wash twice with PBS, 5 minutes each time.
e. Resuspend cells with serum-free cell culture medium or PBS. Observation by fluorescence microscopy or flow cytometry.
2.2 Adherent cells
a. Culture adherent cells on sterile coverslips.
b. Remove the coverslip from the medium and aspirate excess medium.
c. Add 100 μL of working solution, gently shake it to completely cover the cells,and then incubate at room temperature for 3-10 minutes.
d. Wash twice with medium, 5 minutes each time.Observation by fluorescence microscopy or flow cytometry.

Storage
-20°C, 1 year. Protect from light

Precautions 1. Please adjust the concentration of DAPI working solution according to the actual situation.
2. This product is for R&D use only, not for drug, household, or other uses.
3. For your safety and health, please wear a lab coat and disposable gloves to operate.

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Solvant et solubilité

In Vitro:

DMSO : 75 mg/mL (214.13 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

H₂O : 5.56 mg/mL (15.87 mM; ultrasonic and warming and heat to 60°C)

Preparing
Stock Solutions

Concentration Solvent Mass	1 mg	5 mg	10 mg

1 mM	2.8551 mL	14.2755 mL	28.5510 mL
5 mM	0.5710 mL	2.8551 mL	5.7102 mL
10 mM	0.2855 mL	1.4276 mL	2.8551 mL

View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

Protocol 1

Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.94 mM); Clear solution

This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Protocol 2

Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.94 mM); Clear solution

This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Protocol 3

Add each solvent one by one: 10% DMSO 90% Corn Oil
Solubility: ≥ 2.08 mg/mL (5.94 mM); Clear solution

This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL Corn oil, and mix evenly.